Stihl HS 82 T - Maintenance and Repairs

18.4.3 HS 82 RC
600 mm blade: 5.3 kg
750 mm blade: 5.7 kg
18.5 Cutting blades
Sharpening angle to horizontal: 45°
18.6 Noise and Vibration Data
Noise and vibration data are measured at idling
and maximum rated speed in a ratio of 1:4.
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
18.6.1 Sound pressure level L
p
to ISO 22868
HS 82 T
500 mm blade: 95 dB(A)
600 mm blade: 95 dB(A)
750 mm blade: 95 dB(A)
HS 82 R
600 mm blade: 94 dB(A)
750 mm blade: 94 dB(A)
HS 82 RC
600 mm blade: 94 dB(A)
750 mm blade: 94 dB(A)
18.6.2 Sound power level L
w
to ISO 22868
HS 82 T
500 mm blade: 107 dB(A)
600 mm blade: 107 dB(A)
750 mm blade: 107 dB(A)
HS 82 R
600 mm blade: 107 dB(A)
750 mm blade: 107 dB(A)
HS 82 RC
600 mm blade: 107 dB(A)
750 mm blade: 107 dB(A)
18.6.3 Vibration measurement a
hv,eq
to
ISO 22867 (without tip guard)
HS 82 T
Handle, left Handle,
right
500 mm blade:
3.1 m/s
2
2.4 m/s
2
600 mm blade:
2.7 m/s
2
2.1 m/s
2
750 mm blade:
3.6 m/s
2
2.2 m/s
2
HS 82 R
Handle, left Handle,
right
600 mm blade:
2.7 m/s
2
3.1 m/s
2
750 mm blade:
2.4 m/s
2
2.8 m/s
2
HS 82 RC
Handle, left Handle,
right
600 mm blade:
2.5 m/s
2
2.9 m/s
2
750 mm blade:
2.6 m/s
2
2.6 m/s
2
18.6.4 Vibration measurement a
hv,eq
to
ISO 22867 (with tip guard)
HS 82 T
Handle, left Handle,
right
500 mm blade:
2.7 m/s
2
2.2 m/s
2
600 mm blade:
2.7 m/s
2
2.1 m/s
2
750 mm blade:
3.6 m/s
2
2.1 m/s
2
HS 82 R
Handle, left Handle,
right
600 mm blade:
2.4 m/s
2
2.6 m/s
2
750 mm blade:
2.6 m/s
2
2.7 m/s
2
HS 82 RC
Handle, left Handle,
right
600 mm blade:
2.6 m/s
2
2.3 m/s
2
750 mm blade:
3.2 m/s
2
2.8 m/s
2
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2.0 m/s
2
for the vibration level.
18.7 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
18.8 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
19 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
English 19 Maintenance and Repairs
20 0458-448-8321-C