Stihl HTA 65 - Specifications

HTA 65, HTA 85
English
38
Battery
The machine may be operated only with
original STIHL rechargeable batteries.
Running time is dependent on the
energy content of the battery.
Charger
Charge Times
Chain Lubrication
Fully automatic speed-controlled oil
pump with reciprocating piston
Weight
Cutting Attachments
Rollomatic E Mini guide bars
Actual cutting length will be less than
listed bar length.
Specifications
Type: Lithium-ion
Category: AP, AR
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
AL 100
with AP 80:
– up to 80 % capacity: 70 min
– up to 100 % capacity: 100 min
with AP 115:
– up to 80 % capacity: 110 min
– up to 100 % capacity: 140 min
with AP 160:
– up to 80 % capacity: 150 min
– up to 100 % capacity: 165 min
with AP 180:
– up to 80 % capacity: 160 min
– up to 100 % capacity: 210 min
AL 300
with AP 80:
– up to 80 % capacity: 25 min
– up to 100 % capacity: 50 min
with AP 115:
– up to 80 % capacity: 25 min
– up to 100 % capacity: 55 min
with AP 160:
– up to 80 % capacity: 35 min
– up to 100 % capacity: 60 min
with AP 180:
– up to 80 % capacity: 40 min
– up to 100 % capacity: 70 min
AL 500
with AP 80:
– up to 80 % capacity: 25 min
– up to 100 % capacity: 50 min
with AP 115:
– up to 80 % capacity: 20 min
– up to 100 % capacity: 25 min
with AP 160:
– up to 80 % capacity: 35 min
– up to 100 % capacity: 60 min
with AP 180:
– up to 80 % capacity: 25 min
– up to 100 % capacity: 30 min
Oil tank capacity: 0.105 l (3.6 fl.oz)
without guide bar, chain and battery
HTA 65: 3.4 kg (7.5 lbs)
HTA 85: 4.5 kg (9.9 lbs)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30 cm (10, 12 in.)
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm (0.043 in.)