EasyManuals Logo

Stihl MS 210 C User Manual

Stihl MS 210 C
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
46
If the setting is too lean there is a risk of
engine damage due to insufficient
lubrication and overheating.
If engine is down on power, difficult to
start or runs poorly at idling speed, first
check the spark plug.
Fit a new spark plug after approx. 100
operating hours or earlier if the
electrodes are badly eroded.
Wrong fuel mix (too much engine oil in
the gasoline), a dirty air filter and
unfavorable running conditions (mostly
at part throttle etc.) affect the condition
of the spark plug. These factors cause
deposits to form on the insulator nose
which may result in trouble in operation.
Removing the Spark Plug
N Depress throttle trigger lockout and
throttle trigger at the same time and
move the Master Control lever to
choke closed l.
N Turn the knob 90° to the left.
N Lift off the carburetor box cover
vertically.
N Place fingers behind the air filter (3),
press thumbs against the housing,
swing the filter in the direction of the
rear handle and remove it.
N Remove the shutter (4).
N Pull off the spark plug boot.
N Unscrew the spark plug.
Spark Plug
208BA005 KN
4
3
135BA001 KN
208BA020 KN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl MS 210 C and is the answer not in the manual?

Stihl MS 210 C Specifications

General IconGeneral
Displacement35.2 cm³
Weight4.6 kg
Weight (without cutting equipment)4.6 kg
Chain pitch3/8" P
Guide Bar Length35-40 cm
Bar length (recommended)35-40 cm

Related product manuals