MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
58
Maintenance and Care
The following maintenance intervals apply for normal operating conditions only. If your daily working
time is longer or operating conditions are difficult (very dusty work area, resin-rich wood, tropical
wood, etc.), shorten the specified intervals accordingly. If you only use the saw occasionally, extend
the intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
if required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Throttle trigger, trigger lockout, choke lever, stop
switch, Master Control lever (depending on
version)
Check operation XX
Chain brake
Check operation XX
Have checked by dealer
1)
X
Pickup body/filter in fuel tank
Check X
Clean, replace filter element XX
Replace XXX
Fuel tank Clean X
Chain oil tank Clean X
Chain lubrication Check X
Saw chain
Inspect, also check sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over X
Deburr X
Replace XX
Chain sprocket Check X
Air filter
Clean XX
Replace X
Antivibration elements
Check XX
Have replaced by dealer
1)
X
To Next Page
Loading...
Need help?
General
