MS 461 R
English
4
N Grip the handle on top of the depth
limiter with your right hand and
loosen the star knob (2) with your
left hand.
N Set the depth limiter to the required
cutting depth (arrow) and tighten
down the star knob (2) firmly.
N Disengage the chain brake.
Adjusting the delivery rate
N Turn adjusting screw (on the bottom
of the machine) to the right as far as
it will go = maximum delivery rate
Chain lubricant
Because of the anticipated long periods
of disuse, a partly synthetic chain
lubricant, e. g., STIHL Chain and Bar
Lubricant.
Removing the handlebar
N Remove the screws (1).
N Lift away the handlebar (2) to the
rear.
Chain lubrication
Converting a chain saw