MSE 250 C
English
24
Connecting to Wall Outlet
N Connect the power tool's plug or the
extension cord's plug to a properly
installed wall outlet.
N Make sure you have a secure and
balanced footing.
N Check that bystanders are well clear
of the general work area of the
power tool.
N Hold the power tool firmly with both
hands on the handles.
N Check that the saw chain chain is
not touching the wood or any other
object.
N Pull the hand guard towards the
front handle until there is an audible
click and it is in position ‚ – the
chain brake is disengaged.
N Depress the trigger switch
lockout (1) with your thumb.
N Squeeze the trigger switch (2) with
your index finger.
N Start the cut with the chain running.
The motor runs only if the hand guard is
on ‚ and the trigger switch lockout (1)
and trigger switch (2) are operated
simultaneously.
Switching On
To Next Page
Loading...
