EasyManua.ls Logo

Stihl RE 108 - High-Pressure Hose Handling; Hose Kinking and Load Prevention; Nozzles and Their Usage; Fan-Jet Nozzle Function

Stihl RE 108
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RE 108, RE 118, RE 128 PLUS
English
12
High-pressure hose
Nozzles
Fan-jet nozzle (1)
The operating pressure can be infinitely
adjusted at the nozzle.
Jet angle 15°, maximum effect at a
distance of approx. 7 cm.
N Turn nozzle sleeve
Rotary nozzle (2)
Nozzle with rotating jet for stubborn dirt
on hard surfaces. Maximum effect at a
distance of 10 cm.
The spray attachment can also be used
without nozzles at low pressure, e.g., for
rinsing with a large flow of water.
Storage compartment for nozzles
N Open the flap – the rotary nozzle
and fan jet nozzle can be stored in
the holders
Storing accessories
Spray gun, spray lance, detergent bottle
and cleaning pin can be stored directly
on the machine – see "Main Parts".
Detergent must not be allowed to dry on
the object to be cleaned.
N Remove nozzle from spray lance –
see "Fitting, removing spray lance"
N Install spray set (3) on spray
lance (1) – the spray set has an anti-
twist device; orient this according to
the groove on the spray lance
Fill the container of the spray set with
STIHL detergent diluted as directed
(approx. 0.5 liters).
N Use the adjusting ring (4) to set the
quantity of detergent to be added
N When applying detergent, start at
the bottom and work upwards
Maximum effect at a distance of 1 m.
Do not buckle or loop the high-
pressure hose.
Do not place any heavy objects on
the high-pressure hose, and do
not drive any vehicles over it.
666BA015 KN
1
2
-
+
650BA026 KN
Adding detergent
4
666BA016 KN
3
1

Related product manuals