RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
English
18
After use
N Roll the high-pressure hose and
power cable up on the brackets
provided for this purpose – see
"Main Parts"
N Unplug the power plug from the
socket
N Disconnect hose from the water
supply and from the machine
N Rolling up the high-pressure hose
and storing the spray attachment
Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
guaranteed, draw glycol-based
antifreeze – like that used in motor
vehicles – into the pump:
N Insert water intake hose in container
with antifreeze
N Insert spray gun without spray lance
in the same container
N Switch on the machine with the
spray gun open
N Actuate the spray gun until a
uniform jet emerges
N Keep leftover antifreeze in a sealed
container
After Finishing Work
1607BA065 ST
Storing the Machine
To Next Page
Loading...
