12.3 Mowing
► Push the lawn mower forwards slowly and in a
controlled manner.
12.4 Emptying the Grass Catcher
Box
The flow of air generated by the blade raises
level indicator (1). The flow of air stops when the
grass catcher box is full. If the flow of air is too
low, level indicator (1) returns to its resting state.
This is a prompt to empty grass catcher box (2).
The functionality of level indicator (1) is restricted
if the flow of air is impaired. External influences
such as wet, dense or high grass, low cutting
height, dirt or the like can impair the flow of air
and the functionality of level indicator (1).
► If level indicator (1) drops to its resting state:
empty grass catcher box (2).
► Switch the lawn mower off.
► Detach grass catcher box (2).
► Hold grass catcher box (2) with one hand on
handle (3) and the second hand on rear han‐
dle (4).
► Empty grass catcher box (2).
► Attach grass catcher box (2).
13 After Finishing Work
13.1 After Finishing Work
► Switch off the mower, remove the activation
key and battery.
► If the mower is wet: Allow the mower to dry.
► If the battery is wet: Allow the battery to dry.
► Clean the mower.
► Clean the battery.
14 Transporting
14.1 Transporting the Lawn Mower
► Switch the lawn mower off.
The blade must not be turning.
► Pull out the activation key and remove the bat‐
tery.
Pushing the lawn mower
► Push the lawn mower forwards slowly and in a
controlled manner.
Carrying the lawn mower
► Wear work gloves made from resistant mate‐
rial.
English 13 After Finishing Work
34 0478-131-9962-C
To Next Page
Loading...
Need help?
General
