0458-796-9921-A
13
English
7 Assembling the Lawn Mower
6.2 State of Charge
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.3 LEDs on Battery
The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 20.1.
There is a malfunction in the mower or battery.
7.1 Mounting the Handlebar
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Align upper handle (1) and lower handle (2) so that the pin
(4) engages the hole (3) at both sides.
► Insert screw (5) and line it up so that the screw head is
flush with the lower handle (2) on both sides.
► Fit the star knob nut (6).
► Push the cable (7) into the retainer (8).
The handle need not be removed again.
7.2 Fitting and Removing the Grass Box
7.2.1 Fitting the Grass Box
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► If the side chute is still in place: Remove the chute.
► If the mulch plug is still in place: Remove the mulch plug.
7 Assembling the Lawn Mower
1
0000-GXX-0629-A0
20-40%
40-60%
60-80%
80-100%
0-20%
5
7
2
6
3
1
4
8
1
2
0000-GXX-4706-A0
To Next Page
Loading...
