0458-796-9921-A
14
English
7 Assembling the Lawn Mower
► Open the discharge flap (1) and hold it in position.
► Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
► Rest the discharge flap (1) on the grass box (2).
7.2.2 Removing the Grass Box
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the discharge flap and hold it in position.
► Hold grass box by the handle and lift it away.
► Close the discharge flap.
7.3 Fitting and Removing the Mulch Plug
7.3.1 Fitting the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the discharge flap (1) and hold it in position.
► Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
► Close the discharge flap (1).
7.3.2 Removing the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the discharge flap and hold it in position.
► Remove the mulch plug.
► Close the discharge flap.
7.4 Fitting and Removing the Chute
7.4.1 Fitting the Chute
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the side discharge flap (1) and hold it in position.
► Engage hooks (2) on the shaft (4) from below.
► Rest the side discharge flap (1) on the chute (3).
7.4.2 Removing the Chute
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.