Stihl RMI 632.1 - Manual Mowing; Docking the Robotic Mower

EN
65
0478 131 8354 D - EN
● Ending mowing manually:
A running mowing operation can be
ended at any time using the STOP
button or the "Drive home" menu
(Ö 11.6). (Ö 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (Ö 13.1)
RMI 632 C, RMI 632 PC:
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (Ö 10.)
Secondary areas:
● Carry or steer the robotic mower to the
secondary area.
● Activate the secondary area. (Ö 12.10)
● Immediate mowing:
Call up the "Start" menu (Ö 11.5) or
press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
(Ö 23.)
A running mowing operation can be
ended manually at any time using the
STOP button. (Ö 5.1)
15.6 Manual mowing
● Charge the battery if necessary
(Ö 15.8)
● Remove the control panel (Ö 15.2)
● Activate the "Manual mowing"
submenu in the "More" menu (Ö 11.8)
● Move and steer the robotic
mower using the control pad.
Two forward speeds are
available:
Slow (press button lightly), Fast (press
button firmly).
● Always ensure sufficient distance
between the mowing deck and your feet
before activating the mowing blade –
always walk behind the robotic mower.
(Ö 4.2)
● To activate the mowing blade,
press and hold the OK button
with your right thumb, then press
and hold the Mow button with
your left thumb and release the
OK button. The mowing blade rotates
for as long as the Mow button is
pressed.
● During manual mowing, keep the Mow
button pressed down with your left hand
and operate the control pad with your
right hand.
● To deactivate the mowing blade,
release the Mow button.
● Charge the battery after manual
mowing. (Ö 15.8)
15.7 Docking the robotic mower
Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
● If necessary, insert the control panel
(Ö 15.2)
● If necessary, switch on the
docking station (Ö 13.1)
● Activate drive home. (Ö 11.6)
During a mowing operation,
Homecall can also be activated
on the docking station.
● RMI 632 C, RMI 632 PC:
Send the robotic mower to the docking
station in the app. (Ö 10.)
Manual docking:
● Steer the robotic mower to the docking
station using the control panel – remove
the control panel for this purpose
(Ö 15.2) and activate the "Manual
mowing" submenu in the "More"
menu (Ö 11.8).
or
● Push the robotic mower into the
docking station by hand.
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.
The impact sensor and edge
limitation are disabled during
manual mowing.
After docking, no further mowing
operation takes place in the current
active time.