EasyManua.ls Logo

Stihl RT 4097 SX - System Fault Diagnosis; Service Schedule and Records

Stihl RT 4097 SX
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENNO
51
SVFIDAPL
0478 192 9810 A - EN
Wings of mowing blades damaged.
Wrong driving direction during mowing
operation.
Mowing deck (inside) soiled through
deposited grass residues (residue from
last mowing operation).
Remedy:
Wait until the lawn is dry.
Reduce the driving speed and select a
higher cutting level. (Ö 12.6)(Ö 12.4)
Mow the lawn in two stages: 1. Mowing
at the highest cutting level.
2. Mowing at the desired cutting level.
Select a higher cutting level. (Ö 12.6)
Sharpen or replace the mowing blade.
(Ö 14.6)
Replace the mowing blade.
Select correct driving direction during
mowing operation. (Ö 8.7)
Clean inside of mowing deck. (Ö 14.2)
Fault:
Mowing blades do not switch on / do not
rotate.
Possible cause:
The safety devices are preventing
activation of the mowing blades.
V-belt (mowing deck) worn, detached or
defective.
Remedy:
Check whether all the safety
requirements for activation of the
mowing blades are met. (Ö 11.)
Check V-belt (mowing deck) and
replace if necessary. (#)
Fault:
Engine cuts out when mowing deck is
activated.
Possible cause:
User not sitting or not properly
positioned on driver's seat.
Seat switch or wiring is defective.
Remedy:
Sit on the driver's seat or change seat
position.
Repair/replace seat switch or wiring.
(#)
Fault:
Mowing deck disengaged when mowing in
reverse driving direction.
Possible cause:
Reverse mowing safety switch not
pressed.
Remedy:
Release the mowing blades within the
time window (5 seconds before to
1 second after engaging the mowing
deck or changing the driving direction).
(Ö 8.6)
Fault:
Engine cuts out when user leaves driver's
seat.
Possible cause:
Parking brake not engaged.
Mowing deck engaged (safety device).
Remedy:
Engage the parking brake before
leaving the driver's seat. (Ö 8.12)
Disengage the mowing deck before
leaving the driver's seat. (Ö 8.5)
Fault:
Three acoustic signals sound in quick
succession.
Possible cause:
Fault in seat switch or electrics (short
circuit).
Remedy:
Turn ignition key to "engine off"
position, carry out self-diagnosis.
(Ö 9.1)
23.1 Handover confirmation
23. Service schedule

Table of Contents

Related product manuals