EasyManua.ls Logo

Stihl SR 440 - Working and Spray Screens; After Finishing Work

Stihl SR 440
64 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SR 440
English
51
Mistblowing
N Adjust discharge rate with the
metering knob – see "Metering
Unit".
N Open the valve lever – see
"Metering Unit".
Different baffle screens can be fitted to
alter the shape and direction of the spray
for accurate application of the solution.
Conical screen
Spray is finely atomized – short, broad
and dense spray mist.
Deflector screen
Diverts spray jet at an angle – for under-
leaf treatment of low-growing crops.
Dual deflector screen
Splits the spray jet in two – allows two
closely planted rows to be treated in one
pass.
Draining the Solution Container
N Close the valve lever.
N Shut off the engine – see "Starting /
Stopping the Engine".
N Turn the metering knob (1) to
position "6" or "E" and collect the
remaining solution in a suitable
container.
Cleaning the Solution Container
N Rinse and clean the solution
container and hose system with
clear water.
N Dispose of remaining spray solution
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions.
N Allow the unit to dry with the cap
removed.
Working
372BA006 KN
372BA007 KN
372BA008 KN
After Finishing Work
2
1
2431BA022 KN

Related product manuals