34
English / USA
TS 460
: Insert the V-belt in the V-belt
pulley (5)
: Line up the threaded bores in the
bearing plate and the slots in the
cast arm
: Refit the V-belt guard
: Screw in the hexagon bolts (2) as
far as the stop, but do not tighten
them yet
Continue as described under
"Tensioning the V-belt"
The cut-off machine can be mounted on
the STIHL cut-off machine cart without
any difficulty whatsoever.
The cart makes it very much easier to
work with the cut-off machine and is an
indispensable aid when
– repairing damaged carriageway
pavements
– applying carriageway markings or
– cutting expansion joints.
* see "Guide to Using this Manual"
Together with the infinitely variable
cutting depth gauge wheel (special
accessory), the cut-off machine cart
ensures accurate, straight cut edges
and a constant cutting depth accurate to
within a millimetre, particularly when
working with diamond abrasive wheels.
337BA041 LA
STIHL cut-off machine cart*
338BA036
To Next Page
