45TS 700, TS 800
English / USA
1)
STIHL recommends STIHL servicing dealers
* According to equipment version
Maintenance chart
The following maintenance intervals apply in normal operating conditions.
The specified intervals must be shortened accordingly when working for longer
than normal or under difficult cutting conditions (extensive dust, etc.).
Before
starting work
After finishing
work or daily
After each
refuelling stop
Weekly
Monthly
Yearl y
If faulty
If damaged
As required
Complete machine
Visual inspection (condition, leaks)
XX
Clean
X
Operating elements Check operation
XX
Fuel pick-up body in fuel tank
Inspect
X
Replace
XXX
Fuel tank Clean
X
V-belt
Clean / retension
XX
Replace
XX
Air filter (all filter components) Replace
Only if there is a noticeable loss of engine power
Cooling air intake slits Clean
X
Cylinder fins
Have them cleaned by a specialist
dealer
1)
X
Spark arresting screen* in the muffler
Inspect
X
Clean or replace
X
Water attachment
Inspect
XX
Replace
X
To Next Page
Loading...
