TSA 230
English
28
Only fit or replace when the machine is
switched off – retaining latch moved to
ƒ, battery removed.
Removing an abrasive wheel
N Press and hold the spindle locking
mechanism (1)
N Turn the shaft with the combination
wrench until the shaft is blocked
N Use the combination wrench to
loosen the hexagon head screw (2)
N Release the spindle locking
mechanism and unscrew the
hexagon head screw (2)
N Remove the front thrust washer (3)
from the shaft together with the
abrasive wheel (4)
Fitting an abrasive wheel
N Fit the new abrasive wheel (4)
WARNING
Note the arrows indicating the direction
of rotation on diamond abrasive wheels.
N Position the front thrust washer (3)
so that the words "TOP SIDE" are
visible
N Screw in the hexagon head
screw (2)
Fitting / replacing an abrasive
wheel
To Next Page
Loading...
