Need help?Do you have a question about the Still FM-X-14 and is the answer not in the manual?
Identifies and explains various warning and information labels on the truck.
Details information found on the truck's nameplate.
Covers commissioning, proper usage, intended use, and improper use.
Covers roles of operating company, specialist, and drivers.
Requirements, rights, duties, and behavior rules for truck drivers.
Key guidelines for ensuring safe truck operation.
Procedures for reporting and rectifying damage to safety systems.
Discussion of inherent risks and necessary awareness when operating the truck.
Risks related to using the truck outside normal parameters.
Table detailing hazards, actions, and notes for safe operation.
Ordinances and responsibilities for ensuring employee safety during operation.
Procedures for regular inspections and insulation testing.
Ensuring the truck is checked by a specialist annually or after incidents.
Requirements and procedures for insulation resistance testing.
Guidelines for safe handling of oils, battery acid, and brake fluid.
Diagram and labels for controls and displays in the driver's area.
Overview of the display, operating unit, and control buttons.
Details of the truck's display and operating unit.
Explanation of event-related information and malfunction messages.
Daily safety checks for visual inspection and function verification.
Procedures for visual checks of truck components before daily use.
Table detailing daily checks for truck safety and operation.
Safety warnings and procedures for safely entering and exiting the truck.
Procedures for checking service, generator, and reverse brakes.
Safety warnings and procedure for applying the parking brake.
Procedure for switching on the truck.
Procedure for switching on the truck via the key switch.
Rules for driving conduct, speed, and load handling.
Guidelines for safe driving practices and compliance with plant rules.
Ensuring adequate visibility of the driving lane and load.
Rules for roadways, aisle widths, gradients, and driving onto lifts.
Procedures for enabling drive and hydraulic functions via foot and seat switches.
Explanation of electric and mechanical braking systems.
Safety warnings and procedure for applying the parking brake.
Procedure for system malfunctions and re-referencing.
Safety warnings and steps for secure truck parking.
Crucial safety rules to prevent accidents during load handling.
General warnings about falling loads and crushing risks.
Information on load capacity, its influencing factors, and plate location.
Procedure for secure load pickup, ensuring proper fork positioning.
Definition and safety measures for areas around the truck where personnel are at risk.
Procedure and safety warnings for setting down loads correctly.
Guidelines for installing attachments and required safety checks.
Warnings about risks associated with attachments holding loads.
Safety warnings and procedure for emergency shutdown.
Rules of behavior and safety warnings if the truck tips over.
Procedure for manually lowering forks in emergencies or power failure.
Safety warnings and procedures for towing the truck.
General safety regulations for handling lead-acid batteries.
Safety regulations and first-aid measures for lithium-ion batteries.
Requirements for using STILL-approved batteries and matching dimensions.
Reading charge status on display-operating unit and battery indicator.
Instructions for connecting and charging the lithium-ion battery.
Procedure for bringing a deep-discharged battery back into service.
Procedure for replacing the battery using lifting equipment.
Step-by-step guide for removing the battery.
Procedure for installing the battery correctly.
Procedures for cleaning the truck.
Steps for parking the truck and disconnecting the battery.
General information and precautions for transporting the truck.
Warnings about overloading and calculating total truck weight.
Warnings about risks when driving across loading bridges.
Procedure to determine the total loading weight of the truck.
Safety information and procedures for attaching lifting straps.
Warnings and guidelines for safe attachment of lifting straps.
Safety warnings and procedure for loading the truck.
Procedures for safely shutting down and storing the truck.
Measures for proper storage and shutdown.
General safety rules for performing maintenance and repair work.
Information on personnel qualifications and general maintenance tasks.
Safety warnings and procedures for lifting and jacking the truck.
Scheduled maintenance tasks at 1000-hour intervals.
Scheduled maintenance tasks at 3000-hour/2-year intervals.
Checks and maintenance to ensure the truck remains ready for operation.
Procedure for checking hydraulic pipes and hoses for leaks.
Technical values for FM-X 10/12 Li-ion models.
Technical values for FM-X 14 Li-ion models.
Technical values for FM-X 17 Li-ion models.
Technical values for FM-X 20 Li-ion models.
Technical values for FM-X 20 HD Li-ion models.
Technical values for FM-X 25 Li-ion models.
To Next Page
General
