Still RX60-60 - Actuating the Drive Direction Switch, Mini-Console Version; Starting Drive Mode

Operation 4
Traction
5060_003-005
1
Actuating the drive direction switch,
mini-console version
– For the "forwards" drive direction, push the
drive direction switch (1) forwards.
– For the "backwards" drive direction, push
the drive direction switch to the rear.
NOTE
Alternatively, the drive direction can also be
selected using the drive direction switches on
the operating devices.
Starting drive mode
DANGER
Risk to life if the truck rolls away or tips over!
–Sitonthedriver'sseat.
– Fasten the seat belt.
– Activate the available restraint systems.
Observe the information in the chapter entitled
"Safety regulations when driving".
The driver's seat has a seat switch that
checks whether the driver's seat is occupied.
The truck cannot be moved if the driver's
seat is not occupied or if the seat switch
malfunctions. All lifting functions are disabled.
The
SEAT SWITCH message appears on the
display-operating unit.
– Lift the fork carriage until the necessary
ground clearance is achieved.
– Tilt the lift mast backwards.
– Release the parking brake.
– Select the desired drive direction.
563
58042501 EN - 10/2018 131