Maintenance 5
General maintenance information
Maintenance - 1000 hours/annually
At operating hours
1000 2000 4000 5000 7000
Carried out
8000 10000 11000 13000 14000
Chassis, bodywork and fittings
Check the chassis for cracks
Check the overhead guard/cab and panes of glass for damage
Check the controls, switches and joints for damage, and apply grease and oil
Check the driver's seat for correct function and for damage
Check the driver restraint system for correct function and for damage, and clean
Check the battery door and interlock for correct function and for damage
Check the indexing bolt for the battery pallet lock for damage
Check the signal horn
Variant: Check the dual pedal for damage and correct function, and lubricate
Tyres and wheels
Check the tyres for wear and check the air pressure if necessary
Check the wheels for damage and check the tightening torques.
Power unit
Drive axle: Check mounting, check for leaks, clean cooling fins
Check the oil level in the drive wheel unit
Change gearbox oil (once after 1000 hours)
Steering
Check the steering system for correct function and for leaks
Check that the steering wheel is securely attached and check the turning handle for
damage
Steering axle: Check that the steering axle is securely attached, check for leaks and
apply grease
Check
the steering stop
Brake
Check the condition of all mechanical brake parts and check for correct function
Check the brake valve for correct function and leaks
Check the service brake for correct function
Ch
eck the parking brake for correct function
563
58042501 EN - 10/2018 319
To Next Page
Loading...
