SERVICE AND TECHNICAL SUPPORT CALL: FAMILY FUN COMPANIES (708) 598-7320 WWW.FAMILYFUNCOMPANIES.COM
13
INSTRUCTION OF ELECTRONIC COIN COMPARATOR TYPE
Continued on the following page;
A. REMOVE THE PLASTIC COIN FROM COIN SLOT,
REPLACE WITH THE DESIRED TOKEN OR COIN INSIDE
THE SPRING TENSIONED COIN HOLDER.
B. LOOSEN BOLTS AT THE BACK OF COIN ENTRANCE. USE THE DESIRED COIN
DIAMETER TO ADJUST SPACE AT THE BACK OF COIN ENTRANCE. AVOID ERROR
CAUSED BY LARGE DIAMETER TOKENS.
C. ADJUST FOR GAME MAIN BOARD PULSE RATE NEEDS. CHOOSE COIN LONG
SHORT AND FAST SLOW THREE PHASE SWITCH (TIMER SWITCH）：30MS IS SHORT
FAST SIGNAL BEST FOR MACHINE THAT HAS HIGH POWER AND REQUIRES THE
INSERT OF COIN QUICKLY, 50MS IS MIDDLE SIGNAL, BEST FOR ORDINARY MACHINES
(IF NOT SPECIAL CIRCUMSTANCE, THE MACHINE USUALLY CAN USE THIS PHASE).
100MS IS LONG, SLOW SIGNAL, BEST FOR MACHINE THAT DOES NOT NEED INSERT
TO COINS QUICKLY.
D. VR COIN CHOOSE SENSITIVITY ADJUSTMENT，ANTICLOCKWISE ADJUSTMENT（—），
ACCEPT SMALLER AREA OF COIN TOLERANCE，COIN TYPE FILTRATION WILL BE
MORE RESTRICTED.
Wiring：
Grey
Red -DC+12V
White –COIN signal
Code Table
Black-Grounded
Grey
To Next Page
Loading...