Stinger HEIGH 10 - Wiring Diagram

7
www.sngerelectronics-eu.com
WIRING DIAGRAM
ISO Connector
Connect to new stereo
OEM Specific Connector
Connect to relevant connector from vehicle
Stereo Connection (Patch) Lead Connector [12 Pin]
Connect to Interface Box
Note: Must be connected first, before power
connection is made to the interface
Main Wiring Loom Connector [14 Pin]
Connect to Interface Box
Flying Wire Outputs
Pink - Speed Pulse
Green - Park Brake
Purple/White - Reverse Gear
Male Yellow RCA Connector
Connect to aftermarket radio
camera input
Female Yellow RCA Connector
Connect reversing camera
(optional)
Camera Harness
Connector [4 Pin]
Connect to Interface Box