6
www.sngerelectronics-eu.com
CONFIGURATION MENU FUNCTIONALITY
VEHICLE SETTINGS
This interface retains the ability to adjust selected vehicle sengs* on the new stereo
that were present when the original head unit was installed.
The opons available will depend on the individual vehicle and system specicaon.
These might include lights, locks, mirrors, me & date and much more.
*See the vehicle handbook for more informaon regarding these features and how they operate.
INFODAPTER SETTINGS
These sengs allows you to edit the layout/look of the menu screens. These opons
include:
Change the horizontal and vercal screen size/posion to align on the new stereo
display.
Adjust the brightness, contrast and colour saturaon.
Change opons based on vehicle funconality and
specicaon.
This sub-menu (found within the Infodapter Menu) allows you to adjust various details
specic to the vehicle. These include:
Select according to the colour conguraon of the park assist ed to the vehicle.
Select ‘Yes’ if an oponal aermarket reverse camera is connected.
Select whether camera or park assist image is shown by default when reversing. The driver can select the desired image by pressing the ‘Source’ buon (g. )
while reversing.
(Note: this opon is only available when Camera Connected is set to ‘Yes’)
Vehicle Settings
Display
Clock
Safety and Driving Assistance
Lights
Doors and Locks
< Back
Infodapter Settings
Screen Size/Position
Picture Settings
Preferences
< Back
Preferences
Park Assist Version 0
Camera Connected Yes
Reverse Priority Park Assist
Park Brake Source Speed
Restore factory settings
< Back
Set Park Brake output to acvate when park brake is on (Park), when speed is less than 3km/h (Speed) or to remain on at all mes (Always On)
Restores all Infodapter sengs to factory defaults. Note: this does not restore vehicle sengs to defaults.
To Next Page
Loading...
