Getting Started
Before first use
• Read: The best way to familiarise yourself with all the parts and operating principles of your new electric
oven is to read this manual. Pay particular attention to the safety instructions the list of all parts and
buttons.
• Clean: After the appliance has been properly installed, before rst use, wipe the interior oven surfaces with
a soft cloth dampened with warm water and a little mild detergent to remove any dust from transport.
• Wash: Remove and wash the oven rack and baking/drip tray with warm water and a little washing-up
liquid. Dry and return to the oven. Leave the oven door open until it is completely dry.
• Initial use: Before using the oven for the rst time, we recommend you burn off any dust, oil or other
remnants from manufacturing or transport. Set the oven function to the “Intensive Bake” setting and the
thermostat to a 250°C. Any smoke and odour during this initial use is normal and completely harmless;
ensure good ventilation. Leave the oven on for approximately 30 minutes and when cooled, wipe away any
residue.
CAUTION! Take care to avoid burns, the oven becomes very hot during use.
To Next Page
Loading...
