UM1879 Rev 4 7/41
UM1879 Product marking
40
2 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and are therefore not ready to
be used as reference design or in production. Any consequences arising from such usage
will not be at STMicroelectronics’ charge. In no event will STMicroelectronics be liable for
any customer usage of these engineering sample tools as reference designs or in
production.
‘E’ or ‘ES’ marking examples of location:
• on the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section Package information in the STM32 datasheet at www.st.com).
• next to the evaluation tool ordering part number, that is stuck or silkscreen printed on
the board
This board features a specific STM32 device version, which allows the operation of any
bundled commercial stack/library available. This STM32 device shows a "U" marking option
at the end of the standard part number and is not available for sales.
In order to use the same commercial stack in his application, a developer may need to
purchase a part number specific to this stack/library. The price of those part numbers
includes the stack/library royalties.
3 System requirements
• Windows
®
OS (7, 8 and 10), Linux
®
64-bit or macOS
®(a)
• USB Type-A to Micro-B cable
4 Development toolchains
• Keil
®
MDK-ARM
(b)
• IAR™ EWARM
(b)
• GCC-based IDEs including free SW4STM32 from AC6
• Arm
®
Mbed™ online (see http://mbed.org)
a. macOS® is a trademark of Apple Inc., registered in the U.S. and other countries.
b. On Windows only
To Next Page
Loading...
Need help?
General
