What to do if my Storz INSTRUCTION MANUAL Medical Equipment product has failed?
If your Storz Medical Equipment product has failed, first ensure the mains plug is firmly pushed into the connection socket. Then, verify that the wall outlet has electricity. If the issue persists, it could be due to an internal fuse defect, which requires contacting Service.
Why does my Storz INSTRUCTION MANUAL Medical Equipment have no suction?
If your Storz Medical Equipment unit has no suction, examine the fluid level and empty the glass if necessary. Also, clean the plunger ball and check that it moves freely. Another possible cause is a moist and impermeable bacterial filter on the suction bottle, which requires changing the bacterial filter.
How to fix inadequate suction power in Storz Medical Equipment?
If your Storz Medical Equipment exhibits inadequate suction power, check the tubing line for any leakage and replace if necessary. Also, ensure the sealing cap is correctly seated.
What to do if Storz INSTRUCTION MANUAL Medical Equipment has no irrigation pressure?
If your Storz Medical Equipment has no irrigation pressure, check the tubing and connections, replacing them if necessary. If the problem persists, it may be due to defective control electronics.
General| Brand | Storz |
|---|---|
| Model | INSTRUCTION MANUAL |
| Category | Medical Equipment |
| Language | English |
Instructions for safe and correct operation of the medical device.
Explains the meaning of warning symbols (Warning, Caution, Notice).
Describes the primary function and use of the suction/irrigation pumps.
Details situations where the device must not be used or specific precautions.
Lists the anatomical regions where the product can be applied.
Defines what constitutes a serious incident and reporting requirements.
Highlights risks of electric shock and proper grounding/connection.
Precautions for use near medical electrical products and RF equipment.
Explains the primary function and capabilities of the ENDOMAT SELECT.
Identifies key components and features of the device's front view.
Details the user interface elements and their functions on the touchscreen.
Provides specifications like voltage, frequency, power, protection class.
Instructions for setting up the product, including safety warnings.
Step-by-step guide for connecting power, potential equalization, and control cables.
Steps to power on the device and initiate the startup sequence.
Detailed instructions for fitting the tubing set, including safety warnings.
Navigating to the settings sub-menu to configure device parameters.
Procedure to change the device's display language.
Compensating for height differences affecting pressure readings.
Guide to operating the device for irrigation purposes.
Adjusting irrigation flow rate for specific surgical disciplines.
Guide to operating the device for suction purposes.
Adjusting suction flow rate for various procedures.
Recommended maintenance activities and intervals.
Explains how the device communicates status and potential issues.
Details different alarm types, causes, and visual/acoustic indicators.
Requirements for periodic safety inspections of the product.
Performing electrical tests like ground resistance and leakage current.
Lists available accessories and their order numbers for the product.
Information on suitable healthcare environments for product use.
Declares compliance levels for immunity tests based on EN/IEC standards.
Specifies test levels for HF fields based on wireless communication standards.
Provides guidance on maintaining safe distances from HF transmitters.
Provides solutions for common faults and issues encountered with the product.
Lists specific software error messages and their possible causes/actions.
To Next Page