Storz OR1 SCB CONTROL User Manual (English)

Other manuals for Storz OR1 SCB CONTROL

Questions and Answers:

A
Andrea CherryAug 13, 2025
What to do if devices connected with Interface Control or Control do not log on in Storz OR1 SCB CONTROL?
- A
  Adam HallAug 13, 2025
  If the devices connected with Interface Control or Control do not log on, it might be due to several reasons. Check if the RS232 cable is connected to the correct RS232 socket of the Interface Control or ACC Control; if not, use the correct RS232 socket. An incompatible software in the external device could also be the cause, in this case, have the software installed by the manufacturer. Finally, the RS232 cable itself might be incorrect or faulty, try replacing or inserting the cable.
R
rebecca51Aug 16, 2025
Why is the SCB computer switched off for safety reasons in Storz Medical Equipment?
- B
  Brenda MillerAug 16, 2025
  If the SCB computer is switched off for safety reasons, it could be due to an incorrect or faulty SCB cable. Try replacing or inserting the cable. It could also be due to an open SCB cable, in that case remove the cable.
M
Malik RichardsonAug 20, 2025
What to do if Storz Medical Equipment device does not log itself on?
- A
  Annette WilsonAug 20, 2025
  If the device does not log itself on, the SCB or LAN cable connection might be interrupted. Replace or plug in the SCB or LAN cable. Another reason could be that the KARL STORZ certificate for HIVE connection has expired or is not installed. Install or update the KARL STORZ HIVE certificate to resolve this.
N
Nicholas WardAug 25, 2025
What to do if touch screen cannot be used in Storz Medical Equipment?
- G
  grant56Aug 25, 2025
  If the touch screen cannot be used on the Storz Medical Equipment, the cable might be faulty, replace the cable. Alternatively, the cable might be connected to the wrong RS232 port. Connect the cable as per the connection diagram.
M
Mary HunterAug 27, 2025
What to do if touch screen cannot be used on Storz Controller?
- T
  Timothy RichardsAug 27, 2025
  If the touch screen on your Storz Controller is not working, it might be due to a faulty cable or the cable being connected to the wrong RS232 port. Try replacing the cable or connecting it as shown in the connection diagram.
H
heatherhicksAug 31, 2025
Why Storz Controller devices connected with Interface Control or Control do not log on?
- D
  dustin80Aug 31, 2025
  If devices connected with Interface Control or Control are not logging onto your Storz Controller, it could be due to several reasons: * The RS232 cable might be connected to the incorrect RS232 socket of Interface Control or ACC Control. Ensure you are using the correct RS232 socket. * The external device might have incompatible software. Have the software installed by the manufacturer. * The RS232 cable could be incorrect or faulty. Try replacing or re-inserting the cable.
J
Jorge KramerSep 4, 2025
What to do if OR1 SCB CONTROL computer is switched off for safety reasons in Storz Controller?
- M
  Michael HutchinsonSep 4, 2025
  If the OR1 SCB CONTROL computer is switched off for safety reasons on your Storz Controller, the issue might be related to the SCB cable. Specifically, it could be an incorrect or faulty SCB cable, or the cable might be open. Try replacing or inserting the SCB cable. If the cable is open, remove it.
J
Jason BishopSep 8, 2025
Why Storz Controller device does not log itself on?
- T
  Tammy HarveySep 8, 2025
  If your Storz Controller device isn't logging on automatically, it might be due to an interrupted SCB or LAN cable connection. Try replacing or plugging in the SCB or LAN cable. Another possibility is that the KARL STORZ certificate for HIVE connection has expired or is not installed. In this case, install or update the KARL STORZ HIVE certificate.

Storz OR1 SCB CONTROL Specifications

General

Model	OR1 SCB CONTROL
Category	Medical Equipment
Power Supply	100-240 V AC, 50/60 Hz
Manufacturer	Storz
Type	Control unit
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	30% to 75% non-condensing