Programmer / Clock
23
Programmer / Clock
7
8
9
10
11
12
21
Fully automatic cooking
(example)
This programming method is best
suited for when a delayed start time is
required. Unlike the semi automatic
methods this requires both the
duration and the end time to be
entered. The timer will work out the
start time and begin cooking.
Press the function button twice to
select the length of time your food will
need. (7)
The ‘A’ on the left hand side will
flash and the ‘dur’ message will flash
up. (8)
Using the Plus and Minus buttons set
the time you require within 5 seconds
of the ‘dur’ message. (9)
Press the function button three times
until the ‘A’ flashes again and the
‘End’ messages appears. (10) &
(11)
Using the Plus and Minus buttons,
set the time you would like the oven to
switch off. (12)
Set the temperature of the oven and
place the food inside.
While the automatic function is
running, the ‘A’ will appear statically
on the display, with the time.
Try to keep the end time as close to
when you expect to return, this will
prevent cooked food from being left
standing in a warm oven.
The timer will calculate the
appropriate start time.
To Next Page
Loading...
