Need help?Do you have a question about the Straumann Novaloc and is the answer not in the manual?
Overview of Novaloc® Retentive System features and components.
Step-by-step guide for dentists to create an overdenture.
Guide on selecting the correct Novaloc® abutment height.
Process for taking abutment-level impressions.
Steps for dental technicians in the lab.
Creating the master cast from an abutment-level impression.
Steps for completing the overdenture fabrication.
Steps for seating the final overdenture in the dental office.
Instructions for seating the finished overdenture in the patient's mouth.
Instructions for using the Matrix Housing Extractor tool.
Using the Demounting Tool for Inserts and Model Analogs.
Guide for mounting/demounting retention inserts with the tool.
Details on Novaloc® retention inserts and their retention forces.
Function and purpose of the Novaloc® Mounting Collar.
Description of the PEEK Matrix Housing and its aesthetic benefits.
Information on the Matrix Housing with an attachment option.
Function of the Novaloc® Mounting Insert.
Use of the Novaloc® Processing Spacer.
Clinical guidance on chair-side denture modification.
Procedure for chair-side modification of a lower denture.
Guidance for lab-side denture modification.
Procedure for lab-side modification of a lower denture.
General| Manufacturer | Straumann |
|---|---|
| Surface | SLA (Sandblasted, Large-grit, Acid-etched) |
| System | Novaloc |
| Indications | Single tooth replacement, Partial and full edentulism |
| Material | Titanium alloy (TiAl6V4) |
To Next Page