3
.. Impression taking – abutment-level
. Procedure in the dental lab
.. Master cast – abutment-level impression
Step 1 – Placing the Novaloc® Forming/Fixing Matrix
Place the Forming/Fixing Matrix on the Novaloc® Abutment.
Step 2 – Impression taking
Use the mucodynamic technique for impression taking (vinyl poly-
siloxane or polyether rubber).
Send the impression to the dental lab.
Step 1 – Inserting the Novaloc® Model Analog
Insert the Novaloc® Model Analog into the Novaloc® Forming/
Fixing Matrix (see chapter 3 Using the Novaloc® Tools). For
straight abutments use the straight, for angled abutments the
angled analog.
Step 2 – Fabricating the master cast
Pour a master model using standard methods and type-4 dental
stone (DIN 6873).
Note:
The master model can also be created with an implant-level im-
pression.
1
1
2
2
490.115.indd 3 24/06/2019 14:02
To Next Page
Loading...