Straumann Novaloc - 2.3 Dental Office Procedure: Seating; 2.3.1 Seating the Finished Overdenture

5
. Procedure in the dental office
.. Seating the new Novaloc® overdenture
Step 1 – Removing the Novaloc® Mounting Insert
 Remove all Mounting Inserts from the Matrix Housing
using the Demounting Tool for Mounting Inserts (blue)
(see chapter 3 Using the Novaloc® Tools).
Step 2 – Selecting and inserting the Novaloc®
Retention Inserts
 Select the appropriate Novaloc® Retention Insert (see
chapter 4 Special featured Novaloc® components).
 Insert the Novaloc® Retention Inserts to the Matrix
Housing using the Mounting and Demounting Tool
for Retention Inserts (brown) (see chapter 3 Using the
Novaloc® Tools).
Step 3 – Seating the finished overdenture
 Seat the finished overdenture and check the occlusion.
1
2
3
490.115.indd 5 24/06/2019 14:02