Streak 800Pro - Equipment Required For Assembly

2. Equipment Required For Assembly
6pcs-- 40A ESC(6S
22.2V) (e.g. HobbyWing
FlyFun 40A ESC)
18pcs-- 3.5mm Bullet
Connector (Female) for
6pcs ESC
1pcs-- “+” Mode
Hexacopter Controller
(e.g. DJI WK-M)
2pcs-- 6S LiPo Battery
3500-7500mAh 22.2V
( Will be connected in
Parallel)
2pair-- Connectors For
Batteries and Power
Board
1pcs-- Transmitter 1pcs-- Receiver 1pcs-- Lipo Charger &
the connector to fit the
Lipo Battery.
4