23
Chapter X
Warranty and Service
A. Instrument and Transducer Warranty
There are no warranties, expressed or implied by either distributor or the manufacturer on new equipment
except the manufacturer’s warranty against defects in material and workmanship set forth below:
GE Inspection Technologies warrants new instruments manufactured by GE Inspection Technologies and
delivered to the original retail purchaser F.O.B. GE Inspection Technologies’ factory, to be free from defects in
material and workmanship under normal use and service, for a period of two years from delivery of the instru-
ment.
GE Inspection Technologies warrants new transducers manufactured by GE Inspection Technologies and
delivered to the original retail purchaser F.O.B. GE Inspection Technologies’ factory, to be free from defects in
material and workmanship under normal use and service, for ninety (90) days from the date of purchase.
These warranties are subject to the following limitations to which the Buyer expressly agrees:
A. GE Inspection Technologies’ obligation under this warranty is limited solely to repairing or replacing, at
our option and without charge, FOB GE Inspection Technologies’ factory in Lewistown, PA with transporta
tion prepaid by the Buyer within the warranty period and which, upon examination by GE Inspection Tech
nologies shall be found to its reasonable satisfaction to have been thus defective. THIS REMEDY IS EX
PRESSLY SUBSTITUED FOR ANY AND ALL OTHER REMEDIES POSSIBLE UNDER THE UNIFORM
COMMERCIAL, CODE, STATE COMMON OR STATUTORY LAW OR OTHERWISE.
B. The provisions of this warranty SHALL NOT APPLY:
- To any instrument or transducer, which has been subject to misuse, negligence or accident or altered
outside GE Inspection Technologies’ factory in any way so as to, in GE Inspection Technologies’ sole
but reasonable judgement affect its performance and relability.
- To any instrument or transducer, which has been subjected to an environment, chemistry or
To Next Page
Loading...
