46
File Format
The Camera doesn’t capture the desired objects
The Camera stops taking photos/videos
The pictures and videos of the Camera are stored in the folder of\ DCIM\100media of the TF card.
The image le name is saved as imag0001.jpg, and the video le name is saved as imag0001.AVI.
In the "ON" mode, you can download these les to the computer using the USB data cable provided,
or you can put the TF Card in a memory card reader and insert it in a computer to browse the les.
AVI video les can be played on most multimedia devices, such as Windows media player, quick
time, etc
TROUBLESHOOTING
● Try to install the Camera in an area where there are no external heat sources in the Camera’s
eld of view.
● In some cases placing the Camera near water will cause false positives/empty shots.
● Try to install the Camera on stable and immovable objects such as large trees.
● The rising sun or sunset can cause the sensor to trigger. Try reorienting the Camera.
● If a person or animal moves very quickly, it may move out of the Camera’s eld of view before
the photo/video is taken. Try moving the Camera further back to get a larger eld of view.
● Placing the Camera behind glass will impact the PIR sensor.
● Make sure that the memory card has enough storage space. If the memory card is full the
Camera will stop taking photos/videos.
● Check the batteries to make sure there is enough power left. If the power level of the batteries is
too low the Camera will stop functioning.
● Make sure that the Camera’s mode switch is on “ON” and not on “OFF” or “TEST”. The “TEST”
mode should only be used for changing the conguration or viewing photos/videos.
● Sometimes memory cards will get corrupted. Try formatting the memory card or using another
memory card.
To Next Page
Loading...
Need help?
General
