25
ABOUT
INTENDED USE
WARNING:
Thank you for choosing a STREX product. To ensure proper and safe use of the product, please
read the user manual carefully before use. Always follow the instructions to prevent damage or
harm.
Our product complies with the statutory national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Declaration of conformity: We, the manufacturer/importer, declare under our sole responsibility
that this product complies with the essential requirements and other relevant provisions of the
required directives that may apply to this product.
The STREX Digital Infrared Thermometer is designed for safe measuring the surface temperature
of hot, hazardous, or hard-to-reach objects without contact. Just aim and push the trigger, and the
device reads the current surface temperatures in less than a second. There are no other uses for
this product.
Only use the Digital Infrared Thermometer as described in this manual. Any other use is considered
improper and may result in personal injury or material damage. STREX is not liable for damage or
injury resulting from improper or careless use.
If you have any questions, remarks, or problems using the product please contact us by email:
info@strex.nl.
We hope you enjoy your order!
The STREX Digital Infrared Thermometer is not designed for taking the
body temperature of a person..
● CE Certicate: The CE mark (an acronym for the French “Conformite Europeenne”) certies that
a product meets EU health, safety, and environmental requirements, guaranteeing consumer
safety.
● RoHS compliant: The Restriction of Hazardous Substances (RoHS) directive 2011/65/EU is
an EU directive to restrict the use of certain hazardous substances in electrical and electronic
equipment. Each EU Member State must adopt its law to implement this directive.
If a product is RoHS certied, this conrms that the proportion of hazardous or dicult to
remove substances is limited to the maximum allowed.
To Next Page