40
● The Digital Infrared Thermometer does not require any maintenance.
● You may not reconstruct, self-repair, or disassemble the Digital Infrared Thermometer.
● Check regularly for damage and severe wear.
MAINTENANCE & SERVICE
STORAGE & TRANSPORT
WARNINGS:
● Do not attempt to open the Digital Infrared Thermometer for
maintenance. Removing the housing or improper reassembly may
cause electric shocks, damage, short circuit, or re.
● If for any reason you open the housing, the warranty will become
null and void. The Digital Infrared Thermometer contains no user-
serviceable parts. Only the batteries can be replaced.
● To obtain maintenance or service, please contact us rst at our email
address info@strex.nl. Repairs should only be carried out by an
expert or a qualied shop.
● We advise cleaning the Digital Infrared Thermometer before long-time storage.
● Store the device in a place not exposed to sunlight & humidity, which is dust-free.
● Do not store the Digital Infrared Thermometer in extremely high or extremely low temperatures.
This can damage the device.
● Store the device beyond the reach of small children.
● Remove the batteries from the Digital Infrared Thermometer before long-time storage.
● This device is a precision instrument. Protect the device against vibrations and shocks during
transport.
● After transport or storage at very cold temperatures, the Digital Infrared Thermometer must be
accustomed to room temperature for approx. 30 minutes due to possible condensation. After
that, the device can be used.
To Next Page
Loading...