7 BA_310D-R_3100D-R_A16-3_180117_en
2 General
2.1 Operating instructions
Any person involved in the installation, operation, maintenance and repair of
the machine must have read and understood the operating instructions and
mainly the safety instructions before starting the machine.
2.2 Class description, machine number and reference position
left/right
For side-referenced descriptions, the operating side of the machine is the
starting base.
The class descriptions (type) are at the front, the machine and model number
(towards the hyphen) is located below the cover on the right side on the
housing.
2.3 Machine applications
Cl. 310D-R
Two thread blind stitch lock stitch machine for trimming the inside lining up to 8
mm under the lining fold in the jacket hem.
Cl. 3100D-R
Two thread blind stitch lock stitch machine with extended upper and lower arm
for trimming the fabric hem 6 mm (selectable 4 or 8 mm) underneath the hem
edge of jackets.
The enclosed accessories parts enable selectable the execution of both work
sequences for the machines.
Variable sewing tools you will find under point 7.
To Next Page
Loading...
