Strobel 310D-R - Page 7

3 BA_310D-R_3100D-R_A16-3_180117_en
Operating Instructions
STROBEL Classes 310D-R and 3100D-R
Contents
1 General notes on safety ............................................................................................ 5
2 General ..................................................................................................................... 7
2.1 Operating instructions ..................................................................................... 7
2.2 Class description, machine number and reference position left/right ............. 7
2.3 Machine applications ...................................................................................... 7
2.4 Technical data ................................................................................................ 8
3 Set-up and commissioning ........................................................................................ 9
3.1 Unpacking of the machine .............................................................................. 9
3.2 Setting up the machine (Fig. 1 and Fig. 2) ...................................................... 9
3.3 Sense of rotation (Fig. 3) .............................................................................. 13
3.4 Motor drive via toothed belt .......................................................................... 13
3.4.1 Tension of the toothed belt (Fig. 4) .................................................. 13
3.4.2 Positions of the machine .................................................................. 14
3.5 Intermediate venting (Fig. 5) ......................................................................... 15
4 Notes on usage ....................................................................................................... 16
4.1 Needles and threads .................................................................................... 16
4.2 Inserting the needle (Fig. 6) .......................................................................... 16
4.3 Threading and thread run (Fig. 7) ................................................................. 17
4.4 Winding up the thread (Fig. 8) ...................................................................... 19
4.4.1 Installing the bobbin and threading the bobbin thread (Fig. 9) ......... 19
4.5 Thread tensioning (Fig. 6) ............................................................................ 20
4.5.1 Thread tightening spring – needle thread (Fig. 10) .......................... 20
4.5.2 Thread tensioning – reel thread (Fig. 11) ......................................... 21
4.6 Adjusting the stitch length (Fig. 8 and Fig. 12) ............................................. 21
4.6.1 Adjusting the upper feed path (Fig. 6) .............................................. 22
4.7 Stitch depth................................................................................................... 23
4.7.1 Adjusting the stitch depth (Fig. 2 and Fig. 6) .................................... 23
4.7.2 Digital stitch depth display (Fig. 13) ................................................. 24
4.7.3 Changing the battery (Fig. 13) ......................................................... 24
4.8 Plunger stop ................................................................................................. 25
4.8.1 Adjusting the plunger stop (Fig. 14) ................................................. 25
4.9 Interval gear .................................................................................................. 26
4.10 Seam lock ..................................................................................................... 27
4.10.1 General ............................................................................................ 27
4.11 Sewing drive ................................................................................................. 27