Strobel 560-11 - Default Chapter; Table of Contents

1 BA_560_A4_180619_en
Operating instructions
STROBEL series 560
Contents
1 General notes on safety ............................................................................................ 3
2 General ..................................................................................................................... 5
2.1 Operating instructions ..................................................................................... 5
2.2 Class identification, serial number and orientation of the machine ................. 5
2.3 Range of application and intended use .......................................................... 5
2.4 Technical Data ................................................................................................ 6
3 Installation and putting into service ........................................................................... 7
3.1 Unpacking the machine .................................................................................. 7
3.2 Installation (Fig. 1) .......................................................................................... 7
3.3 Sense of rotation .......................................................................................... 10
3.4 Motor drive via Toothed belts ....................................................................... 10
3.4.1 Mounting the toothed belt (Fig. 2) .................................................... 10
3.4.2 Tensioning the V-belt (Fig. 3) ........................................................... 11
3.4.3 Positioning the machine (Fig. 4) ....................................................... 12
4 Instructions for use .................................................................................................. 13
4.1 Needles and threads .................................................................................... 13
4.2 Inserting the needle (Fig. 5) .......................................................................... 13
4.3 Threading and thread course ....................................................................... 14
4.4 Thread tension (upper thread tension) ......................................................... 15
4.4.1 Setting the thread length at the beginning of the seam (lower thread
tension) ............................................................................................ 15
4.5 Stitch depth ................................................................................................... 16
4.5.1 Setting the stitch depth .................................................................... 16
4.5.2 Setting the stitch depth .................................................................... 16
4.6 Digital stitch depth display (optional extra) (Fig. 8) ....................................... 17
4.7 Sewing drive ................................................................................................. 17