Need help?Do you have a question about the Strom Combi E-Boiler Series and is the answer not in the manual?
Discusses boiler placement, frost/damp conditions, and maintenance access.
Key checks and calculations required before starting the boiler installation.
Sequential steps for installing the boiler, including piping and connections.
Steps to follow after the boiler is installed, including testing and checks.
Important considerations for system piping, isolation valves, air vents, and expansion vessels.
Diagram for a heat-only boiler with 2-port valve control for properties under 150m².
Diagram for a heat-only boiler with 3-port valve control for properties under 150m².
Diagram for heat-only boiler with programmable thermostat and TRVs, using a 2-port valve.
Diagram for heat-only boiler with programmable thermostat and TRVs, using a 3-port valve.
Diagram for a combi boiler with programmer, thermostat, and TRVs, using a 2-port valve.
Diagram for a heat-only boiler with programmable thermostat and TRVs, using a 2-port valve.
Diagram for heat-only boiler with programmable thermostats and TRVs for larger properties.
Diagram for heat-only boiler with multi-channel programmer, thermostats, and TRVs for larger properties.
Diagram for a combi boiler with programmable thermostats and TRVs for larger properties.
Diagram for a combi boiler with twin zone programmer, thermostats, and TRVs for larger properties.
Guidance on location, clearance, and safety for mounting the boiler.
Detailed instructions for drilling and securing the boiler mounting bracket.
Guidelines for connecting pipes, ensuring correct tools and hose types are used.
Specifications for heating flow and return pipework connections to the boiler.
Details for connecting hot water inlet and outlet for combination boilers.
Information on connecting the pressure relief valve and its discharge.
How to use the filling point for initial filling or topping up water pressure.
Procedures for flushing the heating system to remove debris and ensure water quality.
Steps for filling the heating system, setting pressure, and adding inhibitor.
Procedure for filling the hot water circuit in combination boilers.
Guidance on supply cable size, isolator switch, and circuit breaker for the boiler.
Advice on selecting appropriate cable types and sizes for boiler installation.
Diagram and list of terminal connections for the boiler's heating circuit.
Information on wiring external programmable thermostats to the boiler.
Essential checks to perform before powering on the boiler for the first time.
Explanation of essential settings like clock, flow temperature, and differential.
Step-by-step guide on how to adjust boiler parameters via the control panel.
Guidance on setting DHW flow rates and outlet temperatures for combination boilers.
Steps to test the heating circuit performance after installation.
Steps to test the hot water output and temperature for combination boilers.
A checklist for plumbers to confirm installation compliance and functionality.
A checklist for electricians to verify electrical connections and safety.
Information on warranty coverage, exclusions, and warranty periods.
General| Fuel Type | Electric |
|---|---|
| Mounting | Wall Mounted |
| Voltage | 230V or 400V (depending on model) |
| Temperature Range | 30°C - 65°C |
| Type | Electric Combi Boiler |
To Next Page
