Need help?Do you have a question about the Strom SBSP15S and is the answer not in the manual?
Provides detailed technical specifications for combination electric boilers.
Step-by-step guide for the physical installation of the boiler.
Advice on choosing a suitable location and maintaining proper clearance around the boiler.
Detailed steps for securely mounting the boiler, including drill hole specifications and bolt usage.
Details on supply cable size, isolator switch, and circuit breaker ratings.
Guidance on verifying all electrical connections, both factory-made and installer-made, before powering on.
Essential steps to complete before applying power to the boiler for the first time.
Details on setting Clock, Boiler Flow Temperature, and Boiler Differential.
Step-by-step guide to adjust the boiler's clock, flow temperature, and differential settings.
Instructions for setting pump speed and purging air from the heating system.
Recommended flow rates for combination boilers to ensure adequate hot water temperature.
Procedure for adjusting the hot water outlet temperature via the control panel.
Steps to test the heating circuit operation and radiator warmth.
Procedure to test the domestic hot water output and temperature.
Troubleshooting guide for error codes E0 through E8, listing potential causes and fixes.
Troubleshooting common issues like control panel errors and heating/hot water problems.
General| Category | Boiler |
|---|---|
| Power | 15 kW |
| Voltage | 400 V |
| Phase | 3 |
| Heating Element Material | Stainless Steel |
| Protection Class | IP44 |
To Next Page
