Need help?Do you have a question about the Strom SBTP21C and is the answer not in the manual?
Technical details for Combination Strom Electric Boilers across various outputs.
Technical details for System Strom Electric Boilers across various outputs.
Step-by-step guide for installing the Strom Electric Boiler.
Tasks to perform after the boiler installation is complete.
Importance and fitting instructions for the automatic bypass valve.
Recommendations for boiler placement, clearance, and safety.
Steps for hanging the boiler and ensuring it is firmly fixed.
Step-by-step guide for filling the heating system initially.
Procedure for filling the hot water circuit in combi boilers.
Details on supply cable, isolator switch, and circuit breaker.
Ensuring all electrical connections, including factory-made, are secure.
Ensuring all installation steps are complete before initial power-up.
Setting the desired flow temperature based on system requirements.
Steps to remove air from radiators and pipework.
Setting the correct flow rate for domestic hot water supply.
Setting the desired domestic hot water outlet temperature.
Verifying the heating system operates correctly after installation.
Checking the hot water supply in combination boilers.
Details potential causes and solutions for specific error codes.
Troubleshooting for specific error codes E9 and EA.
To Next Page
General