Need help?Do you have a question about the Strom SBSP7C and is the answer not in the manual?
Covers all installation steps from piping to boiler parameter configuration.
Details final testing, checklist completion, and owner registration guidance.
Advises on selecting a suitable location and required clearance around the boiler.
Provides step-by-step instructions for drilling holes and securing the boiler mount.
Outlines the correct power supply, cable sizing, and breaker requirements for installation.
Lists essential checks for all electrical connections before powering on the boiler.
Details the necessary steps and checks before applying power to the boiler.
Explains how to set the clock, flow temperature, and differential for optimal operation.
Provides a step-by-step guide to adjusting boiler parameters via the control panel.
Details how to set the domestic hot water flow rate and temperature for combi boilers.
Provides solutions for common error codes E0 through E8 related to circulation and sensors.
Addresses issues with control panel communication, power, and heating/hot water faults.
To Next Page
General