Strong SRT 2023 - Rear Panel; Side Panel; Remote Control; Installing the Batteries

2.3 Rear Panel
Fig. 2
1. AV To connect your IP Box to an audio amplifier.
2. LAN To connect to your modem/router with a RJ 45 network cable.
3. HDMI To connect your IP Box to your TV via HDMI cable.
4. Power To connect the included power adapter of 5 V.
2.4 Side Panel
Fig. 3
1. Micro SD card slot To insert an optional Micro SD card.
2. USB: To connect USB devices like: mouse/keyboard/storage devices
2.5 Remote control
Fig. 4
1. q Turns the IP Box ON/Standby.
2. pq Moves the highlight up/down in the menu.
3. tu Navigates through the menus or changes values of settings in a
menu.
4. OK Confirms a selection.
5. Returns to the Android home screen
6. Returns to the previous menu or exits the app.
7. Opens selection of wall papers.
8. Decreases the volume level.
9. Turns the infrared mouse function ON or OFF. Moves the mouse
pointer to an item (function starts by pressing OK).
10. Increases the volume level.
2.6 Installing the batteries
Fig. 5
Open the cover on the remote control and insert 2x AAA batteries into the compartment.
The correct position of batteries polar diagram is shown inside the batteries compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
6