6.6.4 System Password Change.
To change the default password 1234 into a personal password:
Go to Settings -- Personal -- Security & Restrictions -- Change Password.
Here you have to enter the old PIN code and if accepted, you can enter the new PIN code.
You will be asked to enter the new PIN code again and the message Success will be shown.
6.7 About
Select this menu to see technical details of the IP Box as model name, software version, Wi-Fi MAC
address, Ethernet MAC address, IP address and serial number. You can also find options to upgrade
the software and option to restart the box.
6.7.1 Update
From time to time you can check if there is an improved software version available. This can be
checked and downloaded from our website www.strong.tv. Enter the type number into the service
support on our website. If there is an improved software version, you can download the file and copy
it to the root of a USB device. Once ready insert the USB device to one of the free USB slots of the
Android IP Box. Select Local update and select the USB device and the upgrade file. Press OK and the
upgrade process will start.
Alternatively, you can select Online update to upgrade the software directly from the server online.
This service is not available in all regions. Please, check information from your local dealer or visit our
website www.strong.tv for more information.
NOTE: Upgrades reset the Android IP Box back to the factory settings. Make
sure that you make a backup of the apps, or note the apps you have
downloaded before.
WARNING: During the upgrade and flash process, do not switch off the main power!
Wait until the Android IP Box reboots and restarts automatically.
6.8 Date and Time:
In this menu you will be able to change the date and time settings of the box.
6.9 Language
Select the OSD language which shall be used for the menus on screen.
6.10 HDMI CEC
CEC (Consumer Electronics Control) can be used for controlling your equipment with only 1 remote
control.
Set One key play to ON to use all connected CEC supported equipment that shall be switched ON
when SRT 2023 is switched ON by the remote control.*
14
To Next Page
Loading...
