Struers Labotom-5 - Page 4

6 Operate the device 29
6.1 Cut-off wheels 29
6.1.1 Selecting a cut-off wheel 29
6.1.2 Mount and dismount a cut-off wheel 29
6.2 Clamping devices 30
6.2.1 Position clamping devices 30
6.2.2 Vertical quick clamping devices 30
6.2.3 Mount a quick clamping device 31
6.3 Line laser (option) 31
6.4 Basic operation 32
6.4.1 Control panel functions 32
6.4.2 Clamping the workpiece 32
6.4.3 Start and stop the cutting process 33
7 Maintenance and service - Labotom-5 34
7.1 Daily 35
7.1.1 Flushing gun 35
7.1.2 Cleaning the cooling system 36
7.1.3 Checking the safety guard 36
7.1.4 Checking the cut-off wheel guard 36
7.1.5 Checking the safety guard lock 36
7.2 Weekly 36
7.2.1 Weekly cleaning 36
7.2.2 Cutting chamber 37
7.2.3 Cleaning the clamping devices 37
7.2.4 Cooling system 37
7.3 Monthly 37
7.3.1 Replacing the coolant 37
7.3.2 Maintaining cutting tables 38
7.4 Annually 38
7.4.1 Inspecting the safety guard 38
7.4.2 Cleaning the nozzle on the flushing gun 38
7.5 Cut-off wheels 39
7.5.1 Testing cut-off wheels 39
7.5.2 Storing conventional cut-off wheels 39
7.5.3 Storing diamond and CBN cut-off wheels 39
7.6 Test the safety devices 40
7.6.1 Emergency stop 40
7.6.2 Safety guard 40
7.6.3 Safety guard switch 41
4 Labotom-5