Need help?Do you have a question about the Struers LaboPol-35 and is the answer not in the manual?
Essential safety guidelines and precautions for operating the LaboPol-35 equipment.
List of components to verify are present in the LaboPol-35 packaging.
Procedure for safely removing the LaboPol-35 unit from its packaging case.
Guidelines for positioning the LaboPol-35 on a stable surface near utilities.
Details on connecting the 200-240V variant, including single-phase and 2-phase options.
Instructions for connecting the 100V variant, including single-phase power and machine connection.
Instructions for connecting the water outlet hose, ensuring proper drainage.
Procedure for connecting the water inlet hose to the water tap.
Steps for standard operational tasks such as disc mounting and machine start-up.
Step-by-step guide on how to correctly mount a disc onto the turntable.
Instructions on initiating the machine's operation sequence.
Procedure for safely stopping the machine's operation.
Recommended daily cleaning tasks for maintaining the equipment.
Tasks to be performed on a weekly basis for machine maintenance.
Information on choosing the appropriate discs for grinding and polishing.
Guidance on installing the optional specimen mover accessory.
Instructions for mounting the optional LaboDoser for automatic liquid dispensing.
List of available assembly drawings for the LaboPol-35 components.
List of available circuit and wiring diagrams for the LaboPol-35.
General| Type | Grinding and Polishing Machine |
|---|---|
| Wheel Diameter | 250 mm |
| Max. Wheel Diameter | 300 mm |
| Frequency | 50/60 Hz |
| Disc Diameter | 250 mm |
To Next Page