LaboPol-35
Instruction Manual
2. Struers Metalog Guide™
LaboPol-35 is designed for grinding, polishing and lapping. In Struers
Metalog Guide™ you will find a detailed description of
grinding/polishing for automated mechanical specimen preparation.
Struers Metalog Guide™ offers preparation methods for the most
common materials, based on a simple analysis of two key properties:
hardness and ductility. Finding the right method, including choice of
consumables is easy. Always consult Struers Metalog Guide™ on
the Struers website for the correct preparation method for the actual
specimens.
Struers Metalog Guide™
A complete guide to materialographic specimen preparation.
www.struers.com/KNOWLEDGE/Metalog Guide.
To Next Page