Need help?Do you have a question about the Struers LaboPol-30 and is the answer not in the manual?
Describes the purpose and scope of the instruction manual.
Specifies the machine's application and operational environment.
Lists essential safety guidelines and warnings for operation.
Explains hazard symbols and general safety messages.
Details specific warnings and their context within the document.
Provides an overview of the LaboPol-30's capabilities.
Identifies key components visible on the machine's front.
Details interface options and compatible mover units.
Describes rear components and general preparation principles.
Information on optional items and materials.
Steps to safely remove the unit from its packaging.
Procedure to verify all supplied items are present.
Instructions for safe handling and placement on a workbench.
Specifies ideal placement for operation and service access.
Details electrical connections and safety considerations.
Instructions for connecting water lines.
Steps for connecting the cooling system.
Procedure for mounting the grinding/polishing disc.
Information on operational sound and vibration exposure.
Steps for setting up the LaboUI interface.
Guide on how to use the LaboUI system.
Details the buttons and controls of the LaboUI interface.
How to manage water flow during preparation.
Using the disc rotation feature for drying.
Instructions for using the protective splash guard.
Steps for preparing samples manually.
Procedures for initiating and halting machine operation.
Steps for setting up the specimen mover.
Procedures for setting up the specimen mover head.
Guide on how to use the LaboForce-50 system.
Details the interface buttons and controls.
Managing water flow during preparation.
Using disc rotation for drying.
Protective guard for different preparation types.
Procedure for placing samples into the mover.
Setting the correct pressure for sample preparation.
Steps for preparing samples manually with the mover.
Procedures for initiating and halting operation.
Steps for setting up the specimen mover.
How to connect the device to power.
Details for pneumatic setup.
Procedures for installing holders and plates.
Steps to set the correct sample height.
Setting horizontal alignment for the mover.
Using and installing flexible sample holders.
Guide on how to use the system interface.
Details the interface buttons and controls.
Managing water flow during preparation.
Using disc rotation for drying.
Protective guard for different preparation types.
Understanding the screen layout and information fields.
Options available from the main menu.
How to move through menus and select options.
Procedures for modifying text values and settings.
Configuration of language, date, and time.
Setting various operational parameters.
Accessing cleaning and reset functions.
Introduction to sample preparation modes.
Customizing preparation steps and dosing levels.
Best practices for sample preparation.
Steps for preparing samples manually.
Procedures for initiating and halting processes.
Managing ongoing preparation steps.
Steps for setting up the specimen mover.
Procedures for installing holders and plates.
Setting the correct sample height.
Setting horizontal alignment for the mover.
Guide on how to use the system interface.
Details the interface buttons and controls.
Managing water flow.
Using disc rotation.
Protective guard for different prep types.
Procedure for placing samples.
Setting the correct pressure for preparation.
Utilizing the specimen rotation feature.
Steps for preparing samples manually.
Procedures for initiating and halting operation.
Description and mounting options for the lubricator.
Steps for removing the unit from packaging.
Verifying all supplied components.
Mounting the dosing unit.
How to use the lubricator.
Procedures for refilling and cleaning the unit.
Steps for setting up the dosing unit.
Verifying all supplied components.
Connecting tubes and cables to the system.
How to use the system via LaboForce-100.
Procedures for refilling and cleaning.
Maintaining the dosing system's tubes.
Replacing Novoprene tubes with silicone ones.
Recommended cleaning procedures for machine longevity.
Routine cleaning steps for accessible surfaces.
Regular cleaning and checks for upkeep.
Specific cleaning procedures for the mover head.
Periodic checks and cleaning schedules.
Procedure for emptying the filter.
Procedures for testing safety features annually.
Verifying the functionality of the emergency stop.
How to order and identify replacement parts.
Guidelines for professional maintenance and checks.
Common issues and solutions for LaboPol-30.
Common issues and solutions for LaboForce-50.
Common issues and solutions for LaboForce-100.
Detailed list of error codes and their explanations.
Common issues and solutions for LaboForce-Mi.
Details on discs, speed, power, environment.
Performance levels for safety features.
Operational sound and vibration data.
Block and water diagrams for the machine.
Diagrams for associated equipment.
Compliance notices and standards.
Company contact and address information.
Disclaimer and liability information.
Statement of compliance with relevant directives and standards.
General| Brand | Struers |
|---|---|
| Model | LaboPol-30 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page