Pausing the preparation process
1. To pause the process, press the Stop button.
The step being paused is highlighted in orange on the screen.
2. The process is paused. The Pause icon is shown on the display.
• To continue the preparation, press the Start button.
Stopping the preparation process
The process stops automatically when the set preparation time has expired.
1. To stop the process before the set preparation time has expired, press the
Stop button.
The step being stopped is highlighted in orange on the screen.
2. The process is paused. The Pause icon is shown on the display.
• To stop the preparation completely, press the Stop button again.
Emergency stop
Note
Activating the emergency stop on the machine will stop all movable parts.
Note
Do not use the emergency stop for operational stop of the machine during normal
operation.
1. Press the emergency stop button to activate an emergency stop.
8 LaboForce-100
LaboPol-30 65
To Next Page